The Xiaomi 14 Pro has a 6.73-inch AMOLED display. This is a high-quality OLED screen with a resolution of 3200 x 1440 pixels (QHD+), providing sharp and vibrant visuals. The AMOLED technology allows for deep blacks and vibrant colors, contributing to a premium display experience.
Screen Replacement Process:
Replacing the screen of the Xiaomi 14 Pro involves a fairly complex procedure, typically requiring professional help or experience with phone repairs. Below is a general outline of the screen replacement process:
Tools Needed:
- A suction cup tool
- Plastic opening tools
- Pentalobe screwdriver
- Phillips screwdriver
- SIM card ejector tool
- Heat gun or hairdryer (to soften adhesive)
- Anti-static wrist strap (optional but recommended)
- Replacement screen (OEM or compatible)
Steps:
- Preparation:
- Power off the device to avoid any electrical damage.
- Remove the SIM card tray using the SIM card ejector tool.
- Heat the Device:
- Use a heat gun or hairdryer to soften the adhesive holding the screen in place. Apply heat around the edges of the phone for a few minutes (do not overheat).
- Opening the Device:
- Use a suction cup tool to gently lift the edge of the screen.
- Insert a plastic opening tool in the gap once the screen has been lifted slightly. Gently work your way around the edges to detach the screen from the adhesive. Be careful not to damage the internal components or crack the screen further.
- Disconnecting the Battery:
- Once the screen is separated, use a screwdriver to remove screws holding the internal components in place.
- Carefully disconnect the battery connector to ensure there’s no power running through the device during repairs.
- Disconnecting the Display Cable:
- Unscrew and remove any screws securing the motherboard or components over the display cable.
- Carefully disconnect the display cable from the motherboard, taking care to avoid damaging the fragile connectors.
- Removing the Damaged Screen:
- After disconnecting the display cable, the screen should be free. Remove it gently and ensure no adhesive is left on the phone.
- Installing the New Screen:
- Position the new screen in place and connect the display cable to the motherboard.
- Reconnect the battery cable and secure all components with screws.
- Testing the New Screen:
- Before sealing the phone, power it on and check if the new screen functions properly (touch, display, etc.).
- Sealing the Phone:
- Once satisfied with the screen’s functionality, carefully press the screen into place to ensure the adhesive holds it securely.
- If necessary, apply new adhesive around the edges of the screen.
- Reassemble the Device:
- Replace all screws and reinsert the SIM card tray.
- Power the device on and confirm that everything is working correctly.
Considerations:
- Warranty: Opening the phone and replacing the screen may void any warranty, so check the terms before proceeding with a DIY repair.
- Expert Help: Given the complexity, it’s often recommended to seek professional repair services, especially if you’re unsure about handling delicate internal components.
You can typically get the screen replacement done at Xiaomi service centers or by using certified repair technicians who can provide the correct screen and perform the replacement process professionally.