Replacing an LCD screen on a smartphone is a task that requires precision and careful handling. Whether your ITEL A58 (A661W) has suffered from a cracked display, faulty touch responsiveness, or color distortion, replacing the LCD screen can restore your phone’s functionality. In this blog, we’ll guide you step-by-step through the replacement process, and also introduce you to the essential tools needed for the job.
Why Replace Your ITEL A58 (A661W) LCD Screen?
The ITEL A58 (A661W) is an affordable smartphone with a decent display, but accidents happen, and screens can crack or malfunction. Common reasons you might need to replace the screen include:
- Cracked or Shattered Screen: Physical impacts like dropping the phone can break the screen.
- Touchscreen Not Responding: The screen might still display images, but the touch functionality may stop working.
- Distorted Colors or Dead Pixels: Sometimes, the display might develop permanent color issues or dead pixels, making it hard to use.
- Black Screen: The screen might not turn on at all, despite the phone being powered.
If you’re facing any of these issues, replacing the screen is a cost-effective solution compared to purchasing a new phone.
Tools Required for the ITEL A58 (A661W) LCD Screen Replacement
Before you dive into the replacement process, you need to gather the right tools. Having the appropriate tools will ensure the repair is done correctly and safely without causing further damage to your phone. Here’s a list of essential tools you’ll need:
1. Small Phillips Head Screwdriver
A small-sized Phillips screwdriver is needed to remove the screws on your ITEL A58 (A661W). These screws are typically located near the edges of the device and secure the back cover and internal components.
2. Plastic Pry Tools
Plastic pry tools are essential for safely opening the phone without damaging the casing or screen. Metal tools could scratch or dent the phone, so it’s important to use plastic tools to prevent any cosmetic damage.
3. Suction Cup Tool
A suction cup tool helps you lift the screen off the device. It creates a secure hold on the screen, allowing you to safely pull it away from the phone without exerting too much force.
4. SIM Card Ejector Tool
Before disassembling your phone, you’ll need to remove the SIM card tray. A SIM card ejector tool is a small, simple tool designed for this task.
5. Tweezers
Tweezers are useful for handling small components like screws, connectors, or adhesive tapes during the replacement process.
6. Heat Gun or Hairdryer
In some cases, a heat gun or hairdryer can be used to soften adhesive that holds the screen in place. This makes it easier to remove the screen without damaging it.
7. Replacement LCD Screen
This is the most crucial component of the replacement. Ensure that the replacement LCD screen is compatible with the ITEL A58 (A661W). You can find them online or at local repair shops. It’s important to verify the screen’s quality and guarantee from the supplier.
8. Adhesive Strips or Glue
Once the new screen is in place, you’ll need adhesive strips or glue to secure the new screen firmly to the body of the phone. Many replacement kits come with these pre-cut adhesive strips.
9. Small Suction Tweezers (Optional)
These are helpful for lifting small internal components or cables if necessary during the disassembly.
Step-by-Step ITEL A58 (A661W) LCD Screen Replacement Guide
Now that you have all your tools ready, let’s go through the steps involved in replacing your ITEL A58 (A661W) LCD screen.
Step 1: Power Off Your Device
Make sure your phone is completely powered off before you begin. This is a crucial safety measure to avoid electrical damage or short circuits.
Step 2: Remove the SIM Card Tray
Use the SIM card ejector tool to remove the SIM card tray. This step prevents the card from getting damaged during the repair process.
Step 3: Pry Open the Back Cover
Use the small Phillips head screwdriver to remove any screws that are securing the back cover or any components that need to be removed. Use the plastic pry tools to gently open the back cover. Take care to avoid cracking the plastic or damaging internal components.
Step 4: Disconnect the Battery
Once the back cover is removed, use the tweezers to carefully disconnect the battery from the motherboard. This step prevents any accidental electrical short circuits while working on the device.
Step 5: Heat and Lift the LCD Screen
If the screen is glued in place, use a heat gun or hairdryer to soften the adhesive. Apply heat carefully and evenly to the edges of the screen for about 1-2 minutes. Once the adhesive is softened, use a suction cup tool to lift the screen. Start from the bottom and slowly work your way up, ensuring that you don’t damage the screen or internal components.
Step 6: Disconnect the Screen Connectors
After the screen is lifted, you’ll see several small connectors that connect the LCD to the motherboard. Use tweezers to gently disconnect these connectors. Be cautious not to rip or damage any cables.
Step 7: Install the New LCD Screen
Take your new LCD screen and align it properly with the connectors. Carefully connect the cables to the motherboard, ensuring that everything is properly secured. Once connected, carefully lower the screen into place.
Step 8: Secure the Screen with Adhesive
Once the new LCD screen is in position, apply adhesive strips around the edges or use glue to secure it in place. Press gently but firmly to ensure it sticks properly.
Step 9: Reassemble the Phone
Reconnect the battery and reassemble the phone in the reverse order of disassembly. Replace the screws, insert the SIM card tray, and snap the back cover back into place.
Step 10: Power On Your Device
Finally, power on your ITEL A58 (A661W) to check if the new LCD screen is functioning correctly. Make sure the touch functionality, brightness, and display colors are working as expected.
Conclusion
Replacing the LCD screen on your ITEL A58 (A661W) can be a rewarding DIY project if you have the right tools and follow the steps carefully. While it may seem like a challenging task, with patience and attention to detail, you can successfully replace the screen and bring your phone back to life.
By using the correct tools like a Phillips head screwdriver, plastic pry tools, suction cup tool, and heat gun, you ensure that the process goes smoothly and without causing additional damage to your device. Always ensure that the replacement LCD screen is of good quality and is compatible with your model.
If you’re not confident in performing the replacement yourself, or if you run into any issues during the process, it’s a good idea to consult a professional technician.
Happy repairing!