
Introduction:
The Itel A56, with model number W6004, is a budget-friendly smartphone that offers impressive features for everyday users. However, like any phone, the screen is susceptible to accidental drops, cracks, or damage over time. If you find yourself in need of replacing the screen, this guide will walk you through the process with detailed instructions on how to replace the screen of your Itel A56. We will also provide a list of the necessary tools and tips for a successful replacement.
Important Disclaimer:

Before you proceed with the replacement, please be aware that opening your phone and replacing its screen will void any warranty that may still be active. If you’re not comfortable performing the repair yourself, it’s always a good idea to consult a professional technician.
Tools You’ll Need for the Itel A56 (W6004) Screen Replacement:
Replacing the screen of the Itel A56 requires some technical know-how and a few specialized tools. Here is a list of the essential tools you’ll need to get the job done:
- Screwdrivers (Phillips and Pentalobe):
- A small Phillips screwdriver (cross-head) is necessary to remove screws from the phone body.
- A Pentalobe screwdriver might also be needed, depending on the specific screws used by the manufacturer.
- Plastic Pry Tools:
- A set of plastic pry tools helps you open the phone’s body without damaging the plastic frame or cracking the screen.
- Suction Cup Tool:
- A suction cup helps to lift the screen off the body of the phone. It’s an essential tool for separating the glass from the frame.
- SIM Card Ejector Tool:
- This is required to remove the SIM card tray from the phone before starting the disassembly.
- Tweezers:
- Tweezers are useful for handling delicate components such as connectors or small screws.
- Heat Gun or Hair Dryer:
- A heat gun (or hairdryer) will help soften the adhesive holding the screen, making it easier to remove the broken display without damaging internal parts.
- Adhesive or Double-Sided Tape:
- You’ll need new adhesive or double-sided tape to affix the replacement screen to the phone.
- ESD Safe Mat (Optional but Recommended):
- An anti-static mat will protect your device from electrostatic discharge, which could potentially damage internal components.
Step-by-Step Guide to Replacing the Screen on the Itel A56 (W6004):
Step 1: Preparation
- Before starting the screen replacement, ensure that your device is turned off. Remove the SIM card tray using the SIM ejector tool. Place the phone on an anti-static mat to prevent any electrostatic damage.
- Gather all the tools you will need for the repair to avoid any interruptions.
Step 2: Remove Screws and Back Cover
- Use the appropriate screwdriver to remove the screws around the edges of the back cover.
- Gently use a plastic pry tool to pry open the back cover of the phone. Take your time to ensure you don’t damage any internal components. The back cover may be held in place with some adhesive, so be gentle when separating it.
Step 3: Disconnect the Battery
- Once the back cover is removed, locate the battery connector. Using a plastic prying tool, carefully disconnect the battery from the motherboard to avoid short circuits or electrical damage.
Step 4: Remove the Broken Screen
- To remove the damaged screen, apply heat to the edges of the phone using a heat gun or hair dryer. This softens the adhesive holding the screen in place. Be cautious not to overheat the device, as too much heat can damage internal components.
- Use a suction cup to gently lift the screen off the phone’s body. As you lift, insert a plastic pry tool to separate the screen from the phone, starting at one corner.
- Work your way around the edges until the screen comes free. Be mindful of any flex cables or connectors that may still be attached.
Step 5: Disconnect the Screen
- Once the screen is lifted, you will need to disconnect any flex cables or connectors that link the screen to the motherboard. Use tweezers to carefully remove these connectors.
- After the screen is fully disconnected, remove the old screen from the phone.
Step 6: Prepare the New Screen
- Before installing the new screen, check the new screen for any protective plastic or film. Make sure the replacement screen matches the original in size and design.
- Apply adhesive (double-sided tape or screen adhesive) to the frame of the phone where the screen will be attached. Be sure to apply it evenly for a secure bond.
Step 7: Install the New Screen
- Align the new screen with the phone body. Carefully connect the flex cables to the motherboard, ensuring they are securely attached.
- Press the new screen gently into place, ensuring it adheres to the adhesive around the edges. Make sure the screen fits snugly and that all connectors are properly connected.
Step 8: Reassemble the Phone
- Once the screen is secured, reattach the battery connector. Carefully slide it back into place to reconnect it.
- Align the back cover with the phone and press it gently into place. Use the screws you removed earlier to reattach the back cover.
- Reinsert the SIM card tray.
Step 9: Test the New Screen
- Power on the phone and test the new screen to ensure everything is functioning correctly. Check the touchscreen response, display quality, and resolution. If everything works well, your screen replacement is complete!
Conclusion:
Replacing the screen of your Itel A56 (model number W6004) is a straightforward task, provided you have the right tools and follow the necessary steps carefully. This process may take some time, but with patience and precision, you’ll be able to restore your device to working condition. If you’re not confident in your skills, seeking professional help is always a safe option. Enjoy your repaired Itel A56 and the smooth experience of a brand-new screen!
Important Tips:
- Take your time during the process. Rushing can lead to broken parts or incomplete reassembly.
- Always handle internal components with care to avoid damaging delicate connectors.
- Ensure your new screen is fully compatible with the Itel A56 model number W6004 before purchase.
By following this guide, you can successfully replace the screen on your Itel A56 and save money on expensive professional repair services.